spyc.ai

Free tool

Attribution Model Comparison

Paste conversion paths to compare channel credit under first-touch, last-touch, linear, time-decay and 40/20/40.

How it works

What is the Attribution Model Comparison?

The Attribution Model Comparison is a free tool that shows how much credit each marketing channel gets under five rule-based models. Paste conversion paths as channel sequences with a value. It splits each conversion under first-touch, last-touch, linear, time-decay and position-based rules and totals the credit per channel side by side.

How to use the Attribution Model Comparison

  1. Write one converting path per line, with touchpoints in order and separated by >.
  2. Add a comma and the conversion value at the end of each line, or leave it off to count 1.
  3. Read the table of credit per channel under each of the five models.
  4. Copy the table to paste into a spreadsheet.

What is an attribution model?

An attribution model is a rule for dividing the credit for a conversion among the marketing touchpoints that came before it. A customer might click a search ad, later open an email and finally type your address directly. The model decides how much of that sale each of the three channels is credited with.

No rule is the true one. Each is a different opinion about which touches matter, which is why comparing them is more informative than picking one.

How do first-touch, last-touch and linear attribution differ?

First-touch gives all the credit to the first touchpoint in the path, so it favours channels that introduce people to you. Last-touch gives it all to the final touchpoint, so it favours channels that close. Linear splits the credit equally across every touchpoint.

In the sample, Direct gets nothing under first-touch and the most of any channel under last-touch, because it only ever appears at the end of a path.

How does time-decay attribution work in this tool?

Time-decay gives more credit to touchpoints closer to the conversion. Analytics tools normally base it on elapsed time using a half-life; Universal Analytics, for example, used a default half-life of seven days.

This tool has no timestamps, so it decays by position: each touchpoint gets half the credit of the one after it. In a three-touch path the split is one seventh, two sevenths and four sevenths. It is a simplification, and results will differ from a date-based model.

What is position-based (40/20/40) attribution?

Position-based attribution, also called U-shaped, gives 40% of the credit to the first touchpoint, 40% to the last, and spreads the remaining 20% equally over the touchpoints in between. It rewards both the channel that started the journey and the one that finished it.

Paths too short for that are handled the usual way: a single touch gets 100% and a two-touch path is split 50/50.

Which attribution model should I use?

Use the comparison to find the channels whose credit swings most between models, because those are the ones your budget decisions are most exposed on. A channel that looks strong under every model is a safe bet; one that only looks good under last-touch deserves a closer look.

Google retired first-click, linear, time-decay and position-based models from Google Ads and GA4 during 2023, leaving data-driven and last-click, so a tool like this is one way to still see them. Rule-based credit is not proof of cause: for that, run a holdout test and use the Incrementality Test Calculator. Consistent channel names start with the UTM Builder, and the Marketing Mix Allocator turns the outcome into a budget split.

Questions

What format do the conversion paths need?
One path per line, channels separated by >, then a comma and the value: Paid Search > Email > Direct, 100. Write values without thousands separators.
What if a channel appears twice in one path?
It is credited for each touch. Channel names are matched without regard to capitalisation, so Email and email count as one channel.
Why is the total the same under every model?
Each model hands out exactly 100% of every conversion's value. Only the split between channels changes.
Does the tool include data-driven attribution?
No. Data-driven attribution needs a large set of converting and non-converting paths and a statistical model. This tool covers the five rule-based models only.
Is the Attribution Model Comparison free?
Yes, with a free spyc.ai account. It runs in your browser, so nothing you type is sent to a server.

Marketing Calculators

More in Marketing Calculators

ROAS Calculator

Work out return on ad spend from revenue and spend, plus break-even ROAS and profit from your gross margin.

Calculate ROAS

CAC and LTV Calculator

Get CAC, lifetime value, the LTV:CAC ratio and payback from spend, new customers, ARPU, margin and churn.

Calculate LTV:CAC

Churn Rate Calculator

Measure customer and revenue churn for a month, quarter or year, with compounded monthly and annual rates.

Calculate churn

Ready when you are

Before your next buyer asks AI about you, ask AI about yourself

One check, four engines, about twenty seconds. We show you the answers before we ask for anything.